products details

Home > Products >

Conventional Fire Alarm System

EN54 2 Wire Smoke Alarm

All Category

Conventional Fire Alarm System

Standalone Smoke Detector

Ms. Claire

Claire.tian@xinheantech.com

+8615986702194

Contact Now

EN54 2 Wire Smoke Alarm

Brand Name:	XHA
Model Number:	YT102
MOQ:	1
Price:	negotiable
Packaging Details:	100pcs/carton
Payment Terms:	T/T, Western Union

Detail Information

Product Description

Detail Information

Place of Origin:

China

Certification:

Document:

Product Type:

Smoke Alarm

Certificaiton:

Adjustable Sensitivity:

1.06±.26%FT

Sound Level:

≥90dB

Wired:

2 Wire

Apaitplicon:

Fire Secuirty System

Specification:

D103mm, H55mm

Supply Ability:

10000PCS/Month

Highlight:

EN54 2 Wire Smoke Alarm

CE 2 Wire Smoke Alarm

OEM 2 Wire Smoke Alarm

Product Description

EN54 2 Wire Smoke Alarm For Conventional Fire Alarm System

EN54 2 Wire Smoke Alarm 0

Introduction

The device is photoelectronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm control panel.
Two LEDs on each detector provide local 360° visible alarm indication. They flash every 3~5 seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption.

Parameters

Product Name	Smoke Alarm	Rated operational voltage	9 to 28VDC Volts Non-polarized
Adjustable Sensitivity	1.06±.26%FT	Static current	≤40µA @ 24 VDC
Alarm current	≤30mA @ 24 VDC	Work temperature	-10°C~+50°C
Certification	EN54	Humidity	≤95%.
Size	10310355mm	Weight	155g

Feature

Conventional Smoke Detector, Operates by Advanced MCU Expert Algorithm Software.
Key Specifications/Special Features
They work perfectly with all conventional intelligent fire control panels
Dual LEDs for 360-degree visibility
Advanced MCU Expert Algorithm Software.
Easy installation and maintenance
Durable sensor head, no need for replacement
SMD circuit board design-satisfactory quality and reliability guaranteed

Installation

IMPORTANT: The detector must be tested and maintained regularly following NFPA 72 requirements. The detector should be cleaned at least once a year.
INSTALLATION
NOTE: All wiring must conform to applicable local codes, ordinances, and regulations.
NOTE: Verify that all detector bases are installed, that the initiating-device circuits have been tested, and that the wiring is correct.
Remove power from initiating-device circuits before installing detectors.
1. Wire the sensor base per the wiring diagram, Figure 1.
2. Install the sensor into the sensor base. Push the sensor into the base while turning it clockwise to secure it in place.
3. After all sensors have been installed, apply power to the control unit.
4. Test the sensor(s) as described in the TESTING section of this manual.
5. Notify the proper authorities that the system is in operation.

Warning:Forbid connect 24VDC directly without current-limiting resistance. Otherwise, the detector would be burnt out.

EN54 2 Wire Smoke Alarm 1

Product range

Conventional Fire Alarm System
Addressable fire alarm system
Gas Extinguishing control system
Beam Detector
4 wire smoke detectors with relay output.
2 wire Conventional smoke and heat detectors
Explosion-proof flame detector for fire alarm system
Standalone smoke detectors and combustable gas detector

Service

1. OEM &ODM service.
2. Provide technical support and after-sale service.
3. 1 year warranty.
4. Normally 15 working days lead time.
5. Welcome sample order.

Tags:

Conventional Fire Alarm Panel

Conventional Fire Alarm Control Panel

Conventional Smoke Detector

Products Details

Home > Products >

Conventional Fire Alarm System

EN54 2 Wire Smoke Alarm

All Category

Conventional Fire Alarm System

Addressable Fire Alarm System

Gas Extinguishing System

Beam Detector

Fire Alarm Flame Detector

4 Wire Smoke Detector

Household Gas Detector

Standalone Smoke Detector

EN54 2 Wire Smoke Alarm

Brand Name:	XHA
Model Number:	YT102
MOQ:	1
Price:	negotiable
Packaging Details:	100pcs/carton
Payment Terms:	T/T, Western Union

Detail Information

Product Description

Detail Information

Place of Origin:

China

Brand Name:

XHA

Certification:

Model Number:

YT102

Document:

Product Brochure PDF

Product Type:

Smoke Alarm

Certificaiton:

EN54

Adjustable Sensitivity:

1.06±.26%FT

Sound Level:

≥90dB

Wired:

2 Wire

Apaitplicon:

Fire Secuirty System

Specification:

D103mm, H55mm

Minimum Order Quantity:

Price:

negotiable

Packaging Details:

100pcs/carton

Delivery Time:

3 Working days

Payment Terms:

T/T, Western Union

Supply Ability:

10000PCS/Month

Highlight:

EN54 2 Wire Smoke Alarm

CE 2 Wire Smoke Alarm

OEM 2 Wire Smoke Alarm

Product Description

EN54 2 Wire Smoke Alarm For Conventional Fire Alarm System

Product Name	Smoke Alarm	Rated operational voltage	9 to 28VDC Volts Non-polarized
Adjustable Sensitivity	1.06±.26%FT	Static current	≤40µA @ 24 VDC
Alarm current	≤30mA @ 24 VDC	Work temperature	-10°C~+50°C
Certification	EN54	Humidity	≤95%.
Size	10310355mm	Weight	155g

Feature

Installation

Warning:Forbid connect 24VDC directly without current-limiting resistance. Otherwise, the detector would be burnt out.

EN54 2 Wire Smoke Alarm 1

Service

1. OEM &ODM service.
2. Provide technical support and after-sale service.
3. 1 year warranty.
4. Normally 15 working days lead time.
5. Welcome sample order.

Tags: